Submitted by RakeshRon on Thu, 11/01/2012 - 09:59
USB PROJECT :
This tutorial project shows the Step 1, Making of the Hardware for a computer USB Interface through pic18f4550 Microcontroller (USB INTERFACE BOARD) which allows to control some device like led, motors and other devices with computer through a USB Interface hardware that we are going to make with easy steps. pic18f4550 usb interface project is Human Interface Device (HID).
Submitted by RakeshRon on Mon, 01/06/2014 - 05:50
This project shows how to drive and control a Stepper Motor using a USB Interface. It is controlled via USB interface where small software running on the computer can control the stepping sequence of the stepper motor connected over USB. The stepping sequence and delay between the stepping sequence can be controlled easily with software. USB Stepper Motor Driver project is inexpensively easy to make and can be easily modified to run various types of stepper motor. The project is posted with necessary schematic, description and project files.
Submitted by RakeshRon on Wed, 03/20/2013 - 20:55
This page contains various old and archived Download links for microchip application library installer
Submitted by RakeshRon on Fri, 11/02/2012 - 18:43
BOOT LOAD THE PIC18F4550 - FIRMWARE UPDATING | SETTING THE PIC18F4550 IN RD/WR ( BOOT LOAD ) MODE FOR BOOT-LOADING new code into the USB INTERFACE BOARD, it can be done with a bootloader Software
Submitted by RakeshRon on Fri, 11/02/2012 - 18:22
Winpic800 configuration, A tutorial to configure winpic800 serial JDM programmer ( DB-9 port) for programming your microcontroller , winpic800 configure.
Submitted by RakeshRon on Thu, 11/03/2011 - 13:07
USB Interface board PIC18F4550, Software application and firmware to control 6 led via USB Interface (PC and Laptop). The Application software is written in C# (c-sharp) - visual studio 2010, the Source code and Project files are free to download along with the Firmware and Software.
Submitted by RakeshRon on Tue, 10/19/2010 - 22:50
This Tutorial project shows a Computer USB Interface through pic18f4550 Microcontroller which allows to blink few led's, Control motors and other devices with computer through a USB Interface hardware that we are going to make with easy steps. USB PIC18F4550 interface project is Human Interface Device HID. You can find the Complete pic18f4550 Schematic , Circuit diagram of the hardware with Software , Driver and Complete step by step tutorial for beginner here.